Module livekit.agents.voice.io

Classes

class AgentInput (video_changed: Callable[[], None], audio_changed: Callable[[], None])

Expand source code

class AgentInput:
    def __init__(
        self, video_changed: Callable[[], None], audio_changed: Callable[[], None]
    ) -> None:
        self._video_stream: VideoInput | None = None
        self._audio_stream: AudioInput | None = None
        self._video_changed = video_changed
        self._audio_changed = audio_changed

        # enabled by default
        self._audio_enabled = True
        self._video_enabled = True

    def set_audio_enabled(self, enable: bool) -> None:
        if enable and not self._audio_stream:
            logger.warning("Cannot enable audio input when it's not set")

        if enable == self._audio_enabled:
            return

        self._audio_enabled = enable

        if not self._audio_stream:
            return

        if enable:
            self._audio_stream.on_attached()
        else:
            self._audio_stream.on_detached()

    def set_video_enabled(self, enable: bool) -> None:
        if enable and not self._video_stream:
            logger.warning("Cannot enable video input when it's not set")

        if enable == self._video_enabled:
            return

        self._video_enabled = enable

        if not self._video_stream:
            return

        if enable:
            self._video_stream.on_attached()
        else:
            self._video_stream.on_detached()

    @property
    def audio_enabled(self) -> bool:
        return self._audio_enabled

    @property
    def video_enabled(self) -> bool:
        return self._video_enabled

    @property
    def video(self) -> VideoInput | None:
        return self._video_stream

    @video.setter
    def video(self, stream: VideoInput | None) -> None:
        if stream is self._video_stream:
            return

        if self._video_stream:
            self._video_stream.on_detached()

        self._video_stream = stream
        self._video_changed()

        if self._video_stream:
            if self._video_enabled:
                self._video_stream.on_attached()
            else:
                self._video_stream.on_detached()

    @property
    def audio(self) -> AudioInput | None:
        return self._audio_stream

    @audio.setter
    def audio(self, stream: AudioInput | None) -> None:
        if stream is self._audio_stream:
            return

        if self._audio_stream:
            self._audio_stream.on_detached()

        self._audio_stream = stream
        self._audio_changed()

        if self._audio_stream:
            if self._audio_enabled:
                self._audio_stream.on_attached()
            else:
                self._audio_stream.on_detached()

Instance variables

prop audio : AudioInput | None

Expand source code

@property
def audio(self) -> AudioInput | None:
    return self._audio_stream

prop audio_enabled : bool

Expand source code

@property
def audio_enabled(self) -> bool:
    return self._audio_enabled

prop video : VideoInput | None

Expand source code

@property
def video(self) -> VideoInput | None:
    return self._video_stream

prop video_enabled : bool

Expand source code

@property
def video_enabled(self) -> bool:
    return self._video_enabled

Methods

def set_audio_enabled(self, enable: bool) ‑> None

Expand source code

def set_audio_enabled(self, enable: bool) -> None:
    if enable and not self._audio_stream:
        logger.warning("Cannot enable audio input when it's not set")

    if enable == self._audio_enabled:
        return

    self._audio_enabled = enable

    if not self._audio_stream:
        return

    if enable:
        self._audio_stream.on_attached()
    else:
        self._audio_stream.on_detached()

def set_video_enabled(self, enable: bool) ‑> None

Expand source code

def set_video_enabled(self, enable: bool) -> None:
    if enable and not self._video_stream:
        logger.warning("Cannot enable video input when it's not set")

    if enable == self._video_enabled:
        return

    self._video_enabled = enable

    if not self._video_stream:
        return

    if enable:
        self._video_stream.on_attached()
    else:
        self._video_stream.on_detached()

class AgentOutput (video_changed: Callable[[], None],
audio_changed: Callable[[], None],
transcription_changed: Callable[[], None])

Expand source code

class AgentOutput:
    def __init__(
        self,
        video_changed: Callable[[], None],
        audio_changed: Callable[[], None],
        transcription_changed: Callable[[], None],
    ) -> None:
        self._video_sink: VideoOutput | None = None
        self._audio_sink: AudioOutput | None = None
        self._transcription_sink: TextOutput | None = None
        self._video_changed = video_changed
        self._audio_changed = audio_changed
        self._transcription_changed = transcription_changed

        self._audio_enabled = True
        self._video_enabled = True
        self._transcription_enabled = True

    def set_video_enabled(self, enabled: bool) -> None:
        if enabled and not self._video_sink:
            logger.warning("Cannot enable video output when it's not set")

        if enabled == self._video_enabled:
            return

        self._video_enabled = enabled

        if not self._video_sink:
            return

        if enabled:
            self._video_sink.on_attached()
        else:
            self._video_sink.on_detached()

    def set_audio_enabled(self, enabled: bool) -> None:
        if enabled and not self._audio_sink:
            logger.warning("Cannot enable audio output when it's not set")

        if enabled == self._audio_enabled:
            return

        self._audio_enabled = enabled

        if not self._audio_sink:
            return

        if enabled:
            self._audio_sink.on_attached()
        else:
            self._audio_sink.on_detached()

    def set_transcription_enabled(self, enabled: bool) -> None:
        if enabled and not self._transcription_sink:
            logger.warning("Cannot enable transcription output when it's not set")

        if enabled == self._transcription_enabled:
            return

        self._transcription_enabled = enabled

        if not self._transcription_sink:
            return

        if enabled:
            self._transcription_sink.on_attached()
        else:
            self._transcription_sink.on_detached()

    @property
    def audio_enabled(self) -> bool:
        return self._audio_enabled

    @property
    def video_enabled(self) -> bool:
        return self._video_enabled

    @property
    def transcription_enabled(self) -> bool:
        return self._transcription_enabled

    @property
    def video(self) -> VideoOutput | None:
        return self._video_sink

    @video.setter
    def video(self, sink: VideoOutput | None) -> None:
        if sink is self._video_sink:
            return

        if self._video_sink:
            self._video_sink.on_detached()

        self._video_sink = sink
        self._video_changed()

        if self._video_sink:
            if self._video_enabled:
                self._video_sink.on_attached()
            else:
                self._video_sink.on_detached()

    @property
    def audio(self) -> AudioOutput | None:
        return self._audio_sink

    @audio.setter
    def audio(self, sink: AudioOutput | None) -> None:
        if sink is self._audio_sink:
            return

        if self._audio_sink:
            self._audio_sink.on_detached()

        self._audio_sink = sink
        self._audio_changed()

        if self._audio_sink:
            if self._audio_enabled:
                self._audio_sink.on_attached()
            else:
                self._audio_sink.on_detached()

    @property
    def transcription(self) -> TextOutput | None:
        return self._transcription_sink

    @transcription.setter
    def transcription(self, sink: TextOutput | None) -> None:
        if sink is self._transcription_sink:
            return

        if self._transcription_sink:
            self._transcription_sink.on_detached()

        self._transcription_sink = sink
        self._transcription_changed()

        if self._transcription_sink:
            if self._transcription_enabled:
                self._transcription_sink.on_attached()
            else:
                self._transcription_sink.on_detached()

Instance variables

prop audio : AudioOutput | None

Expand source code

@property
def audio(self) -> AudioOutput | None:
    return self._audio_sink

prop audio_enabled : bool

Expand source code

@property
def audio_enabled(self) -> bool:
    return self._audio_enabled

prop transcription : TextOutput | None

Expand source code

@property
def transcription(self) -> TextOutput | None:
    return self._transcription_sink

prop transcription_enabled : bool

Expand source code

@property
def transcription_enabled(self) -> bool:
    return self._transcription_enabled

prop video : VideoOutput | None

Expand source code

@property
def video(self) -> VideoOutput | None:
    return self._video_sink

prop video_enabled : bool

Expand source code

@property
def video_enabled(self) -> bool:
    return self._video_enabled

Methods

def set_audio_enabled(self, enabled: bool) ‑> None

Expand source code

def set_audio_enabled(self, enabled: bool) -> None:
    if enabled and not self._audio_sink:
        logger.warning("Cannot enable audio output when it's not set")

    if enabled == self._audio_enabled:
        return

    self._audio_enabled = enabled

    if not self._audio_sink:
        return

    if enabled:
        self._audio_sink.on_attached()
    else:
        self._audio_sink.on_detached()

def set_transcription_enabled(self, enabled: bool) ‑> None

Expand source code

def set_transcription_enabled(self, enabled: bool) -> None:
    if enabled and not self._transcription_sink:
        logger.warning("Cannot enable transcription output when it's not set")

    if enabled == self._transcription_enabled:
        return

    self._transcription_enabled = enabled

    if not self._transcription_sink:
        return

    if enabled:
        self._transcription_sink.on_attached()
    else:
        self._transcription_sink.on_detached()

def set_video_enabled(self, enabled: bool) ‑> None

Expand source code

def set_video_enabled(self, enabled: bool) -> None:
    if enabled and not self._video_sink:
        logger.warning("Cannot enable video output when it's not set")

    if enabled == self._video_enabled:
        return

    self._video_enabled = enabled

    if not self._video_sink:
        return

    if enabled:
        self._video_sink.on_attached()
    else:
        self._video_sink.on_detached()

class AudioInput (*,
label: str,
source: AudioInput | None = None)

Expand source code

class AudioInput:
    def __init__(self, *, label: str, source: AudioInput | None = None) -> None:
        self.__label = label
        self.__source = source

    def __aiter__(self) -> AsyncIterator[rtc.AudioFrame]:
        return self

    @property
    def label(self) -> str:
        return self.__label

    @property
    def source(self) -> AudioInput | None:
        return self.__source

    async def __anext__(self) -> rtc.AudioFrame:
        if self.source:
            return await self.source.__anext__()

        raise NotImplementedError

    def on_attached(self) -> None:
        if self.source:
            self.on_attached()

    def on_detached(self) -> None:
        if self.source:
            self.on_detached()

    def __repr__(self) -> str:
        return f"{self.__class__.__name__}(label={self.label!r}, source={self.source!r})"

Subclasses

• livekit.agents.voice.chat_cli._AudioInput
• livekit.agents.voice.recorder_io.recorder_io.RecorderAudioInput
• livekit.agents.voice.room_io._input._ParticipantAudioInputStream

Instance variables

prop label : str

Expand source code

@property
def label(self) -> str:
    return self.__label

prop source : AudioInput | None

Expand source code

@property
def source(self) -> AudioInput | None:
    return self.__source

Methods

def on_attached(self) ‑> None

Expand source code

def on_attached(self) -> None:
    if self.source:
        self.on_attached()

def on_detached(self) ‑> None

Expand source code

def on_detached(self) -> None:
    if self.source:
        self.on_detached()

class AudioOutput (*,
label: str,
next_in_chain: AudioOutput | None = None,
sample_rate: int | None = None)

Expand source code

class AudioOutput(ABC, rtc.EventEmitter[Literal["playback_finished"]]):
    def __init__(
        self,
        *,
        label: str,
        next_in_chain: AudioOutput | None = None,
        sample_rate: int | None = None,
    ) -> None:
        """
        Args:
            sample_rate: The sample rate required by the audio sink, if None, any sample rate is accepted
        """  # noqa: E501
        super().__init__()
        self.__next_in_chain = next_in_chain
        self._sample_rate = sample_rate
        self.__label = label
        self.__capturing = False
        self.__playback_finished_event = asyncio.Event()

        self.__playback_segments_count = 0
        self.__playback_finished_count = 0
        self.__last_playback_ev: PlaybackFinishedEvent = PlaybackFinishedEvent(
            playback_position=0, interrupted=False
        )

        if self.next_in_chain:
            self.next_in_chain.on(
                "playback_finished",
                lambda ev: self.on_playback_finished(
                    interrupted=ev.interrupted,
                    playback_position=ev.playback_position,
                    synchronized_transcript=ev.synchronized_transcript,
                ),
            )

    @property
    def label(self) -> str:
        return self.__label

    @property
    def next_in_chain(self) -> AudioOutput | None:
        return self.__next_in_chain

    def on_playback_finished(
        self,
        *,
        playback_position: float,
        interrupted: bool,
        synchronized_transcript: str | None = None,
    ) -> None:
        """
        Developers building audio sinks must call this method when a playback/segment is finished.
        Segments are segmented by calls to flush() or clear_buffer()
        """

        if self.__playback_finished_count >= self.__playback_segments_count:
            logger.warning(
                "playback_finished called more times than playback segments were captured"
            )
            return

        self.__playback_finished_count += 1
        self.__playback_finished_event.set()

        ev = PlaybackFinishedEvent(
            playback_position=playback_position,
            interrupted=interrupted,
            synchronized_transcript=synchronized_transcript,
        )
        self.__last_playback_ev = ev
        self.emit("playback_finished", ev)

    async def wait_for_playout(self) -> PlaybackFinishedEvent:
        """
        Wait for the past audio segments to finish playing out.

        Returns:
            PlaybackFinishedEvent: The event that was emitted when the audio finished playing out
            (only the last segment information)
        """
        target = self.__playback_segments_count

        while self.__playback_finished_count < target:
            await self.__playback_finished_event.wait()
            self.__playback_finished_event.clear()

        return self.__last_playback_ev

    @property
    def sample_rate(self) -> int | None:
        """The sample rate required by the audio sink, if None, any sample rate is accepted"""
        return self._sample_rate

    @abstractmethod
    async def capture_frame(self, frame: rtc.AudioFrame) -> None:
        """Capture an audio frame for playback, frames can be pushed faster than real-time"""
        if not self.__capturing:
            self.__capturing = True
            self.__playback_segments_count += 1

    @abstractmethod
    def flush(self) -> None:
        """Flush any buffered audio, marking the current playback/segment as complete"""
        self.__capturing = False

    @abstractmethod
    def clear_buffer(self) -> None:
        """Clear the buffer, stopping playback immediately"""

    def on_attached(self) -> None:
        if self.next_in_chain:
            self.next_in_chain.on_attached()

    def on_detached(self) -> None:
        if self.next_in_chain:
            self.next_in_chain.on_detached()

    def __repr__(self) -> str:
        return f"{self.__class__.__name__}(label={self.label!r}, next={self.next_in_chain!r})"

Helper class that provides a standard way to create an ABC using inheritance.

Args

sample_rate

The sample rate required by the audio sink, if None, any sample rate is accepted

Ancestors

• abc.ABC
• EventEmitter
• typing.Generic

Subclasses

• livekit.agents.voice.avatar._datastream_io.DataStreamAudioOutput
• livekit.agents.voice.avatar._queue_io.QueueAudioOutput
• livekit.agents.voice.chat_cli._AudioOutput
• livekit.agents.voice.recorder_io.recorder_io.RecorderAudioOutput
• livekit.agents.voice.room_io._output._ParticipantAudioOutput
• livekit.agents.voice.transcription.synchronizer._SyncedAudioOutput

Instance variables

prop label : str

Expand source code

@property
def label(self) -> str:
    return self.__label

prop next_in_chain : AudioOutput | None

Expand source code

@property
def next_in_chain(self) -> AudioOutput | None:
    return self.__next_in_chain

prop sample_rate : int | None

Expand source code

@property
def sample_rate(self) -> int | None:
    """The sample rate required by the audio sink, if None, any sample rate is accepted"""
    return self._sample_rate

The sample rate required by the audio sink, if None, any sample rate is accepted

Methods

async def capture_frame(self, frame: rtc.AudioFrame) ‑> None

Expand source code

@abstractmethod
async def capture_frame(self, frame: rtc.AudioFrame) -> None:
    """Capture an audio frame for playback, frames can be pushed faster than real-time"""
    if not self.__capturing:
        self.__capturing = True
        self.__playback_segments_count += 1

Capture an audio frame for playback, frames can be pushed faster than real-time

def clear_buffer(self) ‑> None

Expand source code

@abstractmethod
def clear_buffer(self) -> None:
    """Clear the buffer, stopping playback immediately"""

Clear the buffer, stopping playback immediately

def flush(self) ‑> None

Expand source code

@abstractmethod
def flush(self) -> None:
    """Flush any buffered audio, marking the current playback/segment as complete"""
    self.__capturing = False

Flush any buffered audio, marking the current playback/segment as complete

def on_attached(self) ‑> None

Expand source code

def on_attached(self) -> None:
    if self.next_in_chain:
        self.next_in_chain.on_attached()

def on_detached(self) ‑> None

Expand source code

def on_detached(self) -> None:
    if self.next_in_chain:
        self.next_in_chain.on_detached()

def on_playback_finished(self,
*,
playback_position: float,
interrupted: bool,
synchronized_transcript: str | None = None) ‑> None

Expand source code

def on_playback_finished(
    self,
    *,
    playback_position: float,
    interrupted: bool,
    synchronized_transcript: str | None = None,
) -> None:
    """
    Developers building audio sinks must call this method when a playback/segment is finished.
    Segments are segmented by calls to flush() or clear_buffer()
    """

    if self.__playback_finished_count >= self.__playback_segments_count:
        logger.warning(
            "playback_finished called more times than playback segments were captured"
        )
        return

    self.__playback_finished_count += 1
    self.__playback_finished_event.set()

    ev = PlaybackFinishedEvent(
        playback_position=playback_position,
        interrupted=interrupted,
        synchronized_transcript=synchronized_transcript,
    )
    self.__last_playback_ev = ev
    self.emit("playback_finished", ev)

Developers building audio sinks must call this method when a playback/segment is finished. Segments are segmented by calls to flush() or clear_buffer()

async def wait_for_playout(self) ‑> PlaybackFinishedEvent

Expand source code

async def wait_for_playout(self) -> PlaybackFinishedEvent:
    """
    Wait for the past audio segments to finish playing out.

    Returns:
        PlaybackFinishedEvent: The event that was emitted when the audio finished playing out
        (only the last segment information)
    """
    target = self.__playback_segments_count

    while self.__playback_finished_count < target:
        await self.__playback_finished_event.wait()
        self.__playback_finished_event.clear()

    return self.__last_playback_ev

Wait for the past audio segments to finish playing out.

Returns

PlaybackFinishedEvent

The event that was emitted when the audio finished playing out

(only the last segment information)

Inherited members

• EventEmitter:
  • emit
  • off
  • on
  • once

class PlaybackFinishedEvent (playback_position: float,
interrupted: bool,
synchronized_transcript: str | None = None)

Expand source code

@dataclass
class PlaybackFinishedEvent:
    playback_position: float
    """How much of the audio was played back"""
    interrupted: bool
    """Interrupted is True if playback was interrupted (clear_buffer() was called)"""
    synchronized_transcript: str | None = None
    """Transcript synced with playback; may be partial if the audio was interrupted
    When None, the transcript is not synchronized with the playback"""

PlaybackFinishedEvent(playback_position: 'float', interrupted: 'bool', synchronized_transcript: 'str | None' = None)

Instance variables

var interrupted : bool

Interrupted is True if playback was interrupted (clear_buffer() was called)

var playback_position : float

How much of the audio was played back

var synchronized_transcript : str | None

Transcript synced with playback; may be partial if the audio was interrupted When None, the transcript is not synchronized with the playback

class TextOutput (*,
label: str,
next_in_chain: TextOutput | None)

Expand source code

class TextOutput(ABC):
    def __init__(self, *, label: str, next_in_chain: TextOutput | None) -> None:
        self.__label = label
        self.__next_in_chain = next_in_chain

    @property
    def label(self) -> str:
        return self.__label

    @property
    def next_in_chain(self) -> TextOutput | None:
        return self.__next_in_chain

    @abstractmethod
    async def capture_text(self, text: str) -> None:
        """Capture a text segment (Used by the output of LLM nodes)"""

    @abstractmethod
    def flush(self) -> None:
        """Mark the current text segment as complete (e.g LLM generation is complete)"""

    def on_attached(self) -> None:
        if self.next_in_chain:
            self.next_in_chain.on_attached()

    def on_detached(self) -> None:
        if self.next_in_chain:
            self.next_in_chain.on_detached()

    def __repr__(self) -> str:
        return f"{self.__class__.__name__}(label={self.label!r}, next={self.next_in_chain!r})"

Helper class that provides a standard way to create an ABC using inheritance.

Ancestors

• abc.ABC

Subclasses

• livekit.agents.voice.chat_cli._TextOutput
• livekit.agents.voice.room_io._output._ParticipantTranscriptionOutput
• livekit.agents.voice.transcription.synchronizer._SyncedTextOutput

Instance variables

prop label : str

Expand source code

@property
def label(self) -> str:
    return self.__label

prop next_in_chain : TextOutput | None

Expand source code

@property
def next_in_chain(self) -> TextOutput | None:
    return self.__next_in_chain

Methods

async def capture_text(self, text: str) ‑> None

Expand source code

@abstractmethod
async def capture_text(self, text: str) -> None:
    """Capture a text segment (Used by the output of LLM nodes)"""

Capture a text segment (Used by the output of LLM nodes)

def flush(self) ‑> None

Expand source code

@abstractmethod
def flush(self) -> None:
    """Mark the current text segment as complete (e.g LLM generation is complete)"""

Mark the current text segment as complete (e.g LLM generation is complete)

def on_attached(self) ‑> None

Expand source code

def on_attached(self) -> None:
    if self.next_in_chain:
        self.next_in_chain.on_attached()

def on_detached(self) ‑> None

Expand source code

def on_detached(self) -> None:
    if self.next_in_chain:
        self.next_in_chain.on_detached()

class TimedString (text: str,
start_time: NotGivenOr[float] = NOT_GIVEN,
end_time: NotGivenOr[float] = NOT_GIVEN)

Expand source code

class TimedString(str):
    start_time: NotGivenOr[float]
    end_time: NotGivenOr[float]

    def __new__(
        cls,
        text: str,
        start_time: NotGivenOr[float] = NOT_GIVEN,
        end_time: NotGivenOr[float] = NOT_GIVEN,
    ) -> TimedString:
        obj = super().__new__(cls, text)
        obj.start_time = start_time
        obj.end_time = end_time
        return obj

str(object='') -> str str(bytes_or_buffer[, encoding[, errors]]) -> str

Create a new string object from the given object. If encoding or errors is specified, then the object must expose a data buffer that will be decoded using the given encoding and error handler. Otherwise, returns the result of object.str() (if defined) or repr(object). encoding defaults to sys.getdefaultencoding(). errors defaults to 'strict'.

Ancestors

• builtins.str

Class variables

var end_time : float | livekit.agents.types.NotGiven

var start_time : float | livekit.agents.types.NotGiven

class VideoInput (*,
label: str,
source: VideoInput | None = None)

Expand source code

class VideoInput:
    def __init__(self, *, label: str, source: VideoInput | None = None) -> None:
        self.__source = source
        self.__label = label

    def __aiter__(self) -> AsyncIterator[rtc.VideoFrame]:
        return self

    @property
    def label(self) -> str:
        return self.__label

    @property
    def source(self) -> VideoInput | None:
        return self.__source

    async def __anext__(self) -> rtc.VideoFrame:
        if self.source:
            return await self.source.__anext__()

        raise NotImplementedError

    def on_attached(self) -> None:
        if self.source:
            self.on_attached()

    def on_detached(self) -> None:
        if self.source:
            self.on_detached()

    def __repr__(self) -> str:
        return f"{self.__class__.__name__}(label={self.label!r}, source={self.source!r})"

Subclasses

• livekit.agents.voice.room_io._input._ParticipantVideoInputStream

Instance variables

prop label : str

Expand source code

@property
def label(self) -> str:
    return self.__label

prop source : VideoInput | None

Expand source code

@property
def source(self) -> VideoInput | None:
    return self.__source

Methods

def on_attached(self) ‑> None

Expand source code

def on_attached(self) -> None:
    if self.source:
        self.on_attached()

def on_detached(self) ‑> None

Expand source code

def on_detached(self) -> None:
    if self.source:
        self.on_detached()

class VideoOutput (*,
label: str,
next_in_chain: VideoOutput | None)

Expand source code

class VideoOutput(ABC):
    def __init__(self, *, label: str, next_in_chain: VideoOutput | None) -> None:
        self.__label = label
        self.__next_in_chain = next_in_chain

    @property
    def label(self) -> str:
        return self.__label

    @property
    def next_in_chain(self) -> VideoOutput | None:
        return self.__next_in_chain

    @abstractmethod
    async def capture_frame(self, text: rtc.VideoFrame) -> None: ...

    @abstractmethod
    def flush(self) -> None: ...

    def on_attached(self) -> None:
        if self.next_in_chain:
            self.next_in_chain.on_attached()

    def on_detached(self) -> None:
        if self.next_in_chain:
            self.next_in_chain.on_detached()

    def __repr__(self) -> str:
        return f"{self.__class__.__name__}(label={self.label!r}, next={self.next_in_chain!r})"

Helper class that provides a standard way to create an ABC using inheritance.

Ancestors

• abc.ABC

Instance variables

prop label : str

Expand source code

@property
def label(self) -> str:
    return self.__label

prop next_in_chain : VideoOutput | None

Expand source code

@property
def next_in_chain(self) -> VideoOutput | None:
    return self.__next_in_chain

Methods

async def capture_frame(self, text: rtc.VideoFrame) ‑> None

Expand source code

@abstractmethod
async def capture_frame(self, text: rtc.VideoFrame) -> None: ...

def flush(self) ‑> None

Expand source code

@abstractmethod
def flush(self) -> None: ...

def on_attached(self) ‑> None

Expand source code

def on_attached(self) -> None:
    if self.next_in_chain:
        self.next_in_chain.on_attached()

def on_detached(self) ‑> None

Expand source code

def on_detached(self) -> None:
    if self.next_in_chain:
        self.next_in_chain.on_detached()